Sold Out
Sold Out
Sold Out
HP JG937A 5130-48G-POE+-4SFP+ EI Switch - JG937-61001
- Fixed 10G ports for high speed stacking or uplinks
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
- 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ fixed 1000/10000 SFP+ ports
- 1 RJ-45 Serial Console Port
- 1 GB SDRAM, 512 MB flash; packet buffer size: 3 MB
- Mounts in an EIA standard 19-inch telco rack or equipment cabinet
- < 5 µs < 3 µs 130.9 Mpps 176 Gbps 512 entries (IPv4), 256 entries (IPv6) 16384 entries IPv6 Ready Certified
Power cable included only
Product overview
The HPE FlexNetwork 5130 EI Switch Series comprises Gigabit Ethernet switches that support static and RIP Layer 3 routing, diversified services, and IPv6 forwarding, as well as provides four 10-Gigabit Ethernet (10GbE) interfaces. Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in small data centers. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series.
Features and benefits
Software-defined networking • OpenFlow Supports OpenFlow 1.3 specification to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths
Quality of service (QoS)
• Broadcast control Allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
• Advanced classifier-based QoS Classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch HPE FlexNetwork 5130 EI Switch Series
• Powerful QoS feature Supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR • Traffic policing Supports Committed Access Rate (CAR) and line rate
Management
• Remote configuration and management Enables configuration and management through a secure Web browser or a CLI located on a remote device
• Manager and operator privilege levels Provides read-only (operator) and read or write (manager) access on CLI and Web browser management interfaces
• Command authorization Leverages HWTACACS to link a custom list of CLI commands to an individual network administrator’s login; also provides an audit trail
• Secure Web GUI Provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
• Multiple configuration files Stores easily to the flash image
• Complete session logging Provides detailed information for problem identification and resolution
• Remote monitoring (RMON) Uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension group
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP) Advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
• sFlow® (RFC 3176) Provides scalable ASIC-based wire-speed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
• Management VLAN Segments traffic to and from management interfaces, including CLI/Telnet, a Web browser interface, and SNMP
• Remote intelligent mirroring Mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network
• Device Link Detection Protocol (DLDP) Monitors a cable between two compatible switches and shuts down the ports on both ends if the cable is broken, which prevents network problems such as loops
• IPv6 management Provides future-proof networking because the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and RADIUS for IPv6
Troubleshooting Ingress and egress port monitoring enables network problem-solving; virtual cable tests provide visibility into cable problems
• HPE Intelligent Management Center (IMC) Integrates fault management, element configuration, and network monitoring from a central vantage point; built-in support for third-party devices enables network administrators to centrally manage all network elements with a variety of automated tasks, including discovery, categorization, baseline configurations, and software images; the software also provides configuration comparison tools, version tracking, change alerts, and more
• Network management Offers SNMP v1/v2c/v3, with MIB-II Traps, and RADIUS Authentication Client MIB (RFC 2618); embedded HTML management tool with secure access
Connectivity
- Auto-MDIX Adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports
- Flow control Provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
- High-density connectivity Provides up to 48 fixed 10/100/1000BASE-T ports in a Layer 2/Layer 3 switch
- IEEE 802.3at Power over Ethernet (PoE+) support Simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
- Ethernet operations, administration, and maintenance (OAM) Detects data link layer problems that occurred in the “last mile” using the IEEE 802.3ah OAM standard; monitors the status of the link between two devices
CONDITION DESCRIPTION
Assigning the correct condition to each product is the first step toward providing a great customer experience. All units regardless of the condition are Fully Tested and 100% Functional. Any exceptions to any condition description will be mentioned on the product detail page.
Grade A
Minimal to no-wear. A pre-owned product that was inspected and tested to work and look like new. The product has minimal to no signs of wear, no visible cosmetic imperfections when held 14 inches away, and may arrive in a brown or white box with relevant accessories that may be generic.
Grade B
Signs of normal usage. Product will show Wear from previous use, but it remains in good condition and functions properly. Units might have scratches, dents, bents, cracks as well as minor screen imperfections.
Grade C
Signs of heavy usage but continues to function properly. Signs of wear can include moderate to major aesthetic issues such as scratches, dents, worn corners, screen spots or other imperfections. The item may have identifying markings on it or show other signs of previous use. More specifics might be noted in description.
ATTENTION: If you purchased a Coretek product from an authorized distributor and not from the Coretek Online Shop, your purchase is subject to the particular warranty that accompanies the product. That warranty may differ from the warranty posted on this Site. If you purchased a Coretek product from the Coretek Online Shop, the following warranties and policies apply.HARDWARE
I. Money-back Guarantee PolicyReturns
Should you not be completely satisfied with your online store purchase, you may return your purchase within 30 days from your invoice date.
Please note that in both instances, shipping costs are not refunded. To return your Coretek product, send an email to support@coretek.us (including your order number). Coretek will email you a Return Material Authorization (RMA) number. To receive a refund, the product must be returned to the Coretek warehouse within 14 calendar days of the issuance of the RMA. No returns will be accepted without a Return Authorization (RMA) Number. A 10% open box fee will be assessed on any opened package. In addition a restocking fee of 10% will be applied if the product is being retuned without valid reason as stated below.
It is your responsibility to ship your return prepaid and insured for the full purchase price by a carrier that offers package tracking, such as United States Postal Service registered mail, United Parcel Service (UPS), or Federal Express.
The Money-back Guarantee is also contingent upon the products being returned 100% complete and in like-new condition. All products must be packed in the original, unmarked packaging including any accessories, manual and documentation that was shipped with the product. Coretek may reject the return, or deduct costs associated with: missing parts, non-original packaging, abuse, misuse of the product or user negligence.
Exchanges
If you purchased the wrong product and would like to exchange it for another Coretek product, the same regulations as under “Returns” apply, except that we will only charge a 5% open box fee on any opened package. Price differences between the exchanged products will be assessed during the exchange and debited or credited accordingly.
II. Dead On Arrival (DOA) Product
A Coretek hardware product is considered DOA if it shows symptoms of hardware failure, preventing basic operability, upon its first use out of the box. If you believe that your product is DOA, please contact support@coretek.us within 10 calendar days of the invoice date.
If the product is deemed DOA by Coretek Technical Support within 10 calendar days of the invoice date, you are eligible to receive a replacement unit. If the product is deemed not DOA by Coretek Technical Support or if the product is deemed DOA more than 10 calendar days after the invoice date. Coretek’s limited product warranty will apply (see section below on Defective Items Limited Warranty).
Shipping will be arranged at Coretek’s expense for all products determined by the Coretek Technical Support Team to be DOA. Coretek reserves the right to test returned DOA product. If the condition of the product is misrepresented by the customer, Coretek may impose a $100 handling fee.
III. Defective Items Limited Warranty
Coretek offers a 365 Day Hardware warranty on new and refurbished products purchased online. The warranties are in effect from the invoice date. Software of any kind delivered with or as part of a Coretek product is expressly provided “as is” unless specifically provided by a license accompanying the software. If any Coretek product subject to this Limited Warranty fails during this time for reasons that are covered by our Limited Warranty, Coretek, at its option, will:
- REPAIR the defect by means of hardware and/or software, using new or refurbished replacement parts; OR
- REPLACE the product with a product that is new or which has been manufactured from new or serviceable used parts and is the functional equivalent to the original product; OR
- REFUND the replacement value of the product.
To request warranty service from Coretek, contact support@coretek.us during the coverage period or call us at 704-792-2221 (9am to 5pm EST), excluding holidays. Please provide: (1) your name, address, and telephone numbers; (2) model name and order number of the product; (3) an explanation of the problem.
A replacement product or part assume the remaining warranty of the original.
Coretek does not sell warranty extensions or accept old hardware products in exchange for new hardware products at reduced prices.
THIS LIMITED WARRANTY, AND ANY IMPLIED WARRANTIES THAT MAY EXIST UNDER STATE LAW, APPLY ONLY TO THE ORIGINAL PURCHASER OF THE CORETEK PRODUCT.
Warranty Limitations and Exclusions
These warranties replace all other warranties, expressed or implied including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Coretek makes no expressed warranties beyond those stated here. Coretek disclaims all other warranties, expressed or implied including, without limitation, implied warranties of merchantability and fitness for a particular purpose. Some jurisdictions do not allow the exclusion of implied warranties so this limitation may not apply. All expressed and implied warranties are limited in duration to the limited warranty period. No warranties apply after that period. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.
Limitations of Liability
Coretek’s responsibility under this, or any other warranty, implied or expressed, is limited to repair, replacement or refund, as set forth above. These remedies are the sole and exclusive remedies for any breach of warranty. Coretek is not responsible for direct, special, incidental, or consequential damages resulting from any breach of warranty under another legal theory including, but not limited to, lost profits, downtime, goodwill, damage to or replacement of equipment and property, and any costs of recovering, reprogramming, or reproducing any program or data stored in or used with a system containing this Coretek product. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
Dispute Resolution
This limited warranty gives you specific legal rights, and you may also have other rights that vary from jurisdiction to jurisdiction. Any and all disputes arising under or related to this limited warranty shall be adjudicated in the United States. The forum shall be Concord, North Carolina, USA, and the applicable law shall be that of the state of North Carolina, USA.